H42 Vertical lift flanged check valve
Flange check valveis to rely on the flow of the medium itself and automatically open, close disc, used to prevent the medium backflow valve, also known as the check valve, one-way valve, reverse flow valve, and back pressure valve.Check valve belongs to a kind of automatic valve, its main function is to prevent the backflow of media, prevent the reversal of pump and drive motor, as well as the release of container media. Check valves can also be used in piping where pressure may rise above system pressure to supply an auxiliary system.Check valves can be divided into swing check valves (rotating according to the center of gravity) and lifting check valves (moving along the axis).
The purpose of this type of valve is to allow the medium to flow in only one direction and to stop the flow in that direction.Normally the valve works automatically and the disc opens under pressure from a flow of fluid in one direction.Flow in the opposite direction, by the fluid pressure and disc self - coincidence disc on the seat, thereby cutting off the flow.
Design Features | |
Design standard | GB/T 12235 |
Flanged ends | GB/T 9113,JB/T 79,HG 20596 |
Test & inspection | JB/T 9092,GB/T 13927 |
Applicable medium | Water,oil,gas ect |
Main parts and materials | ||
ITEM | PART | MAIN MATERIAL |
1 | Body | WCB CF8 CF8M CF3M |
2 | Bonnet | WCB CF8 CF8M CF3M |
3 | Valve seat | WCB+D507Mo CF8 CF8M CF3M |
4 | Disc | WCB+D507 CF8 CF8M CF3M |
Unit:mm
Main dimensions(1.6Mpa) | ||||||
SIZE | H | D | D1 | D2 | Z-φd | |
1-1/4 | [1mH42 Válvula de retenção flangeada de elevação vertical | A válvula de retenção do flange depende do fluxo do próprio meio e abre e fecha automaticamente o disco, usado para evitar a válvula de refluxo do meio, também conhecida como válvula de retenção, válvula unidirecional, válvula de fluxo reverso e válvula de contrapressão. pertence a um tipo de válvula automática, sua principal função é evitar o refluxo da mídia, evitar a reversão da bomba e do motor de acionamento, bem como a liberação da mídia do recipiente. | Válvulas de verificação | 78 | também pode ser usado em tubulações onde a pressão pode subir acima da pressão do sistema para fornecer um sistema auxiliar. As válvulas de retenção podem ser divididas em válvulas de retenção de giro (girando de acordo com o centro de gravidade) e válvulas de retenção de elevação (movendo-se ao longo do eixo). | |
A finalidade deste tipo de válvula é permitir que o meio flua em apenas uma direção e interromper o fluxo nessa direção. Normalmente a válvula funciona automaticamente e o disco abre sob pressão de um fluxo de fluido em uma direção. direção oposta, pela pressão do fluido e disco de auto-coincidência do disco na sede, cortando assim o fluxo. | Características de design | Padrão de projeto | GB/T 12235 | Extremidades flangeadas | 85 | GB/T 9113,JB/T 79,HG 20596 |
2" | Teste e inspeção | JB/T 9092, GB/T 13927 | Meio aplicável | Água, óleo, gás ect | Principais peças e materiais | ITEM |
PAPEL | MATERIAL PRINCIPAL | Corpo | WCB CF8 CF8M CF3M | Gorro | WCB CF8 CF8M CF3M | Sede da válvula |
3" | WCB+D507Mo CF8 CF8M CF3M | Disco | WCB+D507 CF8 CF8M CF3M | Unidade: mm | Dimensões principais (1,6Mpa) | TAMANHO |
4" | Z-φd | 1-1/4[22m | |64| | |65| | |66| | |
5" | |67| | |68| | |69| | |70| | |71| | |72| |
6" | |73| | |74| | |75| | |76| | |77| | |78| |
8" | |79| | |80| | |81| | |82| | |83| | |84| |
|85|
|86|
|87|
|88|