Driver de LED de tensão constante AC a DC 12V 36W

Sales Driver de LED de tensão constante AC a DC 12V 36W

Driver LED de tensão constante CA para CC 12V 36W
  • :
  • :
  • :
  • :
  • :
  • :

Detalhes do produto  


SPECIFICAION
MODEL SMT-012-036WW SMT-024-036VW SMT-036-036VW
OUTPUT DC VOLTAGE 12V 24V 36V
RATED CURRENT 3.0Amp 1.5Amp 1.0Amp
CURRENT RANGE 0~3.0A 0~1.5A 0~1.0A
RATED POWER 36W 36W 36W
RIPPLE&NOISE(max) 150mV 150mV 150mV
CURRENT TOLERANCE ±0.5V ±0.5V ±0.5V
SETUP RISE TIME 80ms/110,220VAC 81ms/110,220VAC 82ms/110,220VAC
HOLD UP TIME(Typ.) 60ms/110-220VAC 60ms/110-220VAC 60ms/110-220VAC
INPUT VOLTAGE RANGE 100~265VAC
FREQUENCY RANGE 50~60Hz
POWER FACTOR(Typ.)
EFFICIENCY(Typ.) >84% >84% >83%
AC CURRENT(Typ.) 3.5A/110,220VAC 2.0A/110,220VAC 1.5A/110,220VAC
INRUSH CURRENT (Typ.) COLD START 50A/110~220VAC
PROTECTION Short circuit Protection type:recovers automatically after condition is removed
Overload overload protected@145-160% above peak rating
Over temperature Protection type:Shut down o/p voltage,re-power on to removed
ENVIRONMENT WORKING TEMP. -30~+50℃ (Refer to output load derating curve)
WORKING HUMIDITY 20~99% RH non-condensing(Waterproof)
STORAGE TEMP.,HUMIDITY -40~+80℃,10~99%RH
SAFETY&EMC SAFETY STANDARDS ETL/ROHS/CE Mark(EMC,LVD),IP67
WITHSTAND VOLTAGE I/P-O/P:1.5KVAC  IP-GND:1.5KVAC
EMC Test Standards EN55015:2006;EN61547:1995+2000;EN61000-3-2:2006
EN61000-3-3:1995+A2:2005;EN61346-1:2001;EN61347-2-13:2006
NOTE 1.All parameters NOT specially mentoned are measured at 110V,220VAC input,rated load and 25℃ of ambient temperature.
2.Ripple&noise are measured at 20MHz of bandwidth by using a 12
Nome do produto:  AC para DC12V 36W Constant voltage LED power supply

Click Send Email for Details
Click skpye 24 hours Online Reply
Scan to start our communication
Back to top


V 36W Fonte de alimentação LED de tensão constante


ESPECIFICAÇÃO
MODELO
SMT-012-036WW
SMT-024-036VW
SMT-036-036VWSAÍDA
VOLTAGEM DE CORRENTE CONTÍNUA
12V24V
36V
CORRENTE NOMINAL
3,0 Amp
1,5 Amp
1,0 Amp


INTERVALO ATUAL


0~3,0A
0~1,5A
0~1,0A
POTÊNCIA NOMINAL
36W
36 W
36W
ONDULAÇÃO E RUÍDO (máx.)
150mV


150mV


150mV
TOLERÂNCIA ATUAL
±0,5V
±0,5V
±0,5V
TEMPO DE AUMENTO DE CONFIGURAÇÃO
80ms/110.220VAC
81ms/110.220VAC
82ms/110.220VAC

HOLD UP TIME (Tip.)

Tags :
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
X

Home

Supplier

Leave a message

Leave a message

If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.