Features 1. High efficiency,save energy ,protected environment. 2. High stability and low ripple, increase light efficiency and decrease light attenuation. 3. Meet to safety standard and EMC 4. Assure LED stability long lift and light efficiency by constant voltage. 5. Integrity protection,over loading, over voltage ,over current. 6. Protections:Short circuit/Overload/Over temperature 7. Cooling by free air convection 8. 100% full load burn-in test. 9. Suitable for LED lighting |
| SPECIFICAION | |||||
| MODEL | SMT-012-150VW | SMT-024-150VW | |||
| OUTPUT | DC VOLTAGE | 12V | 24V | ||
| RATED CURRENT | 12.5A | 6.25A | |||
| CURRENT RANGE | 0~12.5A | 0~6.25A | |||
| RATED POWER | 150W | 150W | |||
| RIPPLE&NOISE(max) | 150mV | 150mV | |||
| VOLTAGE TOLERANCE | ±0.5V | ±0.5V | |||
| SETUP RISE TIME | 80ms/110VAC, 220VAC | ||||
| HOLD UP TIME(Typ.) | 60ms/110VAC, 220VAC | ||||
| INPUT | VOLTAGE RANGE | 100-265VAC | |||
| FREQUENCY RANGE | 50~60Hz | ||||
| POWER FACTOR(Typ.) | 0.95 | ||||
| EFFICIENCY(Typ.) | ﹥87% | ﹥87% | ﹥87% | ﹥87% | |
| AC CURRENT(Typ.) | 1.85A/110VAC, 220VAC | ||||
| INRUSH CURRENT (Typ.) | COLD START 50A/110VAC, 220VAC | ||||
| PROTECTION | Short circuit | Protection type:recovers automatically after condition is removed | |||
| Overload | overload protected@145-160% above peak rating | ||||
| Over temperature | Protection type:Shut down o/p voltage,re-power on to removed | ||||
| ENVIRONMENT | WORKING TEMP. | -30~+55℃ (Refer to output load derating curve) | |||
| WORKING HUMIDITY | 20~99% RH non-condensing(Waterproof) | ||||
| STORAGE TEMP.,HUMIDITY | -40~+80℃,10~99%RH | ||||
| SAFETY&EMC | SAFETY STANDARDS | CE ETL Mark(EMC,LVD),IP67 | |||
| WITHSTAND VOLTAGE | I/P-O/P:1.5KVAC IP-GND:1.5KVAC | ||||
| EMC Test Standards | EN55015:2006;EN61547:1995+2000;EN61000-3-2:2006 | ||||
| EN61000-3-3:1995+A2:2005;EN61346-1:2001;EN61347-2-13:2006 | |||||
| NOTE | 1.All parameters NOT specially mentoned are measured at 110VAC,220VAC input,rated load and 25℃ of ambient temperature. | ||||
| 2.Ripple&noise are measured at 20MHz of bandwidth by using a 12 | |||||
| [1mNome do produto: AC para DC |  | ||||
 |  |  |  |
Fonte de alimentação LED de tensão constante de 150 W
1. Alta eficiência, economia de energia, ambiente protegido.2. Alta estabilidade e baixa ondulação, aumenta a eficiência da luz e diminui a atenuação da luz.
VOLTAGEM DE CORRENTE CONTÍNUA12V24V
CORRENTE NOMINAL
150mV
150mV
Subscribe to our weekly newsletter and receive exclusive offers on products you love!
X
Gold Supplier
