Pressure Vessel

22mm ID. x 90mm Height

max available sample height 70mm

Made of high strength alloy with stainless steel protective jacket

Max. Hydraulic Pressure in Chamber

300 Mpa ( 43500 PSI)

Gauge Pressure Value to
Force Conversion

Gauge Displayed Pressure Value (Mpa) for 87 mm Dia. Hydraulic Press

5

10

15

20

Actual Force Applied on the Hydraulic Press (Ton)

3

6

9

12

Pressure Applied to CIP Vessel ( Mpa) vs 22mm vessel cylider

77

155

232

310

Notes:

The actual force applied on the Vessel Cylinder (Ton) equal to the force applied to your working piece

For calculating the actual pressure (Mpa) applied on your working piece, please follow the equations in below:

P u003d T/π r^2 x g x 10

P: Pressure (Mpa) applied on your working piece

T: Force (metric ton) Applied on the Pressure Vessel Cylinder

g: Standard gravity. g≈ 9.8 m/s2

π : ~3.14

r: Radius (cm) of the Pressure Vessel (1.1 cm)

1000 Kg u003d 1 Metric Tone; 1 Mpa≈ 10 Kg/cm2

Hydraulic Machine

15T

Botton Cylinder Traveling Distance

20mm maximum

Operation Temperature

10 - 40°C

Dimension of Working Space

D1: 100mm   D2: 85mm   D3: 90mm
H1: 310mm       H2: 290mm

Overall Dimension
(including 15T Presser)

270mm (W) x 240mm (D) x 660mm (H)

Net Weight

100 Lbs

Compliance

CE Certified

Warranty

Two years limited warranty with lifetime support

Application Notes

You may use the liquid rubber to seal the sample to be CIP

You may use the machine as a dry pressing to order pressing die

Warning

Never let the press hold the target pressure be longer than 8 minutes,

It's normal that the target pressure decreases a little bit during the pressure holding time, so never press the red nor the green button in this period.

Pressure must be completely released first, then make sure the hand wheel and the pressure release valve has been tightened before pressing

Do not raise the bottom cylinder (piston) more than it's maximum traveling distance. (20mm)

Name

Qty

1

Main machine (15T Electric hydraulic pressing machine)

1 unit

2

Cold isostatic pressing dies (locating plate, top and bottom pressing die)

1 set

3

Seal kits

1 set

4

Black Rubber Rings O.D 7/8

5

Prensa isostática a frio hidráulica de laboratório 15T com recipiente de 22mm de diâmetro interno

YLJ-CIP-15

6

é uma Certificação CE e a menor prensagem isostática a frio (CIP) do mundo. Possui uma câmara hidráulica de 22 mm de diâmetro interno feita de liga ultra-resistente, que pode fornecer pressão isostática de até 300 Mpa por meio de uma prensa hidráulica de 15T. É uma excelente ferramenta para preparar pellets compostos de alta densidade e hastes de pequeno diâmetro. O CIP-15 ocupa pouco espaço e pode ser colocado no porta-luvas para preparar materiais sensíveis ao ar. Uma tampa de proteção de plástico está incluída.

Especificação

7

Vaso de Pressão

22mm DI. x 90mm Altura